Anaesthesia System KAM-B100 is fully featured high-end general anaesthesia workstation equipped with wide screen display for respiratory trends, and other vital parameters. PCV and SIMV + PS modes ensure flexible ventilation. Comprehensive monitoring and intelligent gas flush and cut-off system for critical events improves patient safety.
Ventilation Modes | IPPV, PCV, SIMV + PS, PS and Manual |
Tidal Volume | 20 ml to 1500 ml |
Pressure (Inspiratory) | 5 cmH2O – 70 cmH2O |
Pressure (Support) | 3 cmH2O – 50 cmH2O |
Electronic PEEP | Off / 3 cmH2O – 30 cmH2O |
I: E Ratio | 4:1 to 1:8 |
Display | 10.4” TFT Colour |
Drive | Pneumatically driven and electronically controlled |
Pressure Trend | Paw, Ppeak, Pplat, Pmean, PEEP |
Volume Monitoring | MV, VT, Freq |
Graph Display | P-T, F-T, P-V, F-V |
Ventilation Gas (Optional CO2, AG, MAC) | FiO2 |
Operational modes | Closed, Semi-closed, Semi-open |
Gas Supply | O2 , Air, N2O |
Ventilator Pressure at Inlet | 280 kPa ~ 600 kPa |
Flowmeter | O2 : 0 ~ 10L/min Air : 0 ~ 12L/min N2O : 0 ~ 10L/min Auxiliary O2 : 0 ~ 12L/min |
Vaporizer | Supports 2 vaporizers |
CO2 Absorption Tank | 3 L Autoclavable |
Vaporizer Filling methods | Pour Fill Key Fill Quick-Fil |
Anaesthetic Agents | Halothane, Enflurane, Isoflurane, Sevoflurane |
APL Range | Spontaneous breathing (SP) -70 cmH2O |
T-slope | 0 ~ 2s |
Plateau (Inspiratory) | Off / 5% – 60% Ti |
Trigger Sensitivity | 1 – 15 L/min |
Alarm | High/Low Airway Pressure, Sustained Airway Pressure, High/Low Minute Volume, High/Low FiO2, High Breath Rate, O2 supply failure, Power failure, Apnea alarm, Mute : 110s |
Power Supply | 100 V ~ 240 V 50/60 Hz |
Battery | 24 V 4Ah ; 120 min |
Dimensions | 760 × 1300 × 630mm |
Weight | 100 Kgs |
Used in Surgical or Gynaecological departments to administer appropriate anaesthesia dosage at a specified rate to ensure effective sedation during surgeries and other invasive diagnostic or interventional procedures.